Inheritance diagram for ComponentC:

Additional Inherited Members
Public Types inherited from Component
enum	CQSEnumT { CType , QType , SType , UndefinedCQSType }
	Enum type for all CQS types.

Public Member Functions inherited from Component
virtual void	configure ()
	Configures a component by setting up ports, variables, constants and other resources.

virtual void	reconfigure ()
	Re-configures a component, depending on e.g. parameter values or external files.

virtual void	deconfigure ()
	Deconfigure a component, use this to cleanup and memory/resource allocations you have made in configure.

virtual bool	preInitialize ()
	This function can be used to automate things prior to component initialization, only use this if you know what you are doing.

virtual bool	checkModelBeforeSimulation ()

virtual bool	initialize (const double startT, const double stopT)
	Virtual Function, base version which gives you an error if you try to use it.

virtual void	simulate (const double stopT)
	Simulates the component from current simulation position to stopT using previously set timestep.

void	setDisabled (bool value)

bool	isDisabled () const

void	setDesiredTimestep (const double timestep)

void	setInheritTimestep (const bool inherit=true)
	Set whether the component should inherit timestep from its system parent.

bool	doesInheritTimestep () const
	Check if a component inherits timestep from its system parent.

void	setName (HString name)
	Set the desired component name.

const HString &	getName () const
	Get the component name.

const HString &	getTypeName () const
	Get the TypeName of the component.

const HString &	getSubTypeName () const
	Get the SubType name of the component.

void	setSubTypeName (const HString &rSubTypeName)
	Set the SubType name of the component.

HString	getTypeCQSString () const
	Get the CQStype as string.

virtual bool	isComponentQ () const
	Check if a component is a Q-Component.

virtual bool	isComponentSystem () const
	Check if a component is a System-Component.

virtual bool	isComponentSignal () const
	Check if a component is a Signal-Component.

virtual bool	isExperimental () const
	Check if component is tagged as experimental.

virtual bool	isObsolete () const
	Check if component is tagged as obsolete.

void	addConstant (const HString &rName, const HString &rDescription, const HString &rQuantityOrUnit, const double defaultValue, double &rData)
	Add (register) a constant parameter with a default value to the component.

void	addConstant (const HString &rName, const HString &rDescription, const HString &rQuantity, const HString &rUnit, const double defaultValue, double &rData)
	Add (register) a constant parameter with a default value to the component.

void	addConstant (const HString &rName, const HString &rDescription, HTextBlock &rData)

void	addConstant (const HString &rName, const HString &rDescription, HFilePath &rData)

void	addConditionalConstant (const HString &rName, const HString &rDescription, std::vector< HString > &rConditions, int &rData)
	Add (register) a conditional constant parameter to the component.

void	addConditionalConstant (const HString &rName, const HString &rDescription, std::vector< HString > &rConditions, const int defaultValue, int &rData)
	Add (register) a conditional constant parameter to the component.

void	setReconfigurationParameter (const HString &rName)

const std::vector< VariameterDescription > *	getVariameters ()

virtual std::list< HString >	getModelAssets () const

virtual size_t	loadParameterValues (const HString &rFilePath)
	Loads parameters from a file.

void	registerConditionalParameter (const HString &rName, const HString &rDescription, std::vector< HString > &rConditions, int &rValue)
	Register a conditional parameter value so that it can be accessed for read and write.

virtual void	unRegisterParameter (const HString &rName)
	Removes a parameter from the component.

bool	hasParameter (const HString &rName) const
	Check if a component has a specific parameter.

void	getParameterNames (std::vector< HString > &rParameterNames)

const std::vector< ParameterEvaluator * > *	getParametersVectorPtr () const

const ParameterEvaluator *	getParameter (const HString &rName)

void	getParameterValue (const HString &rName, HString &rValue)

void *	getParameterDataPtr (const HString &rName)
	Returns a pointer directly to the parameter data variable.

bool	setParameterValue (const HString &rName, const HString &rValue, bool force=false)

bool	checkParameters (HString &errParName)

void	evaluateParameters ()

bool	evaluateParameter (const HString &rName, HString &rEvaluatedParameterValue, const HString &rType)

void	setDefaultStartValue (Port *pPort, const size_t idx, const double value)
	Set the default startvalue in a port.

void	setDefaultStartValue (const HString &rPortName, const HString &rDataName, const double value)
	Set the default startvalue in a port.

double	getDefaultStartValue (Port *pPort, const size_t idx, const size_t portIdx=0)
	Get the an actual start value of a port.

double	getDefaultStartValue (const HString &rPortName, const HString &rDataName, const size_t portIdx=0)
	Get the an actual start value of a port.

void	disableStartValue (Port *pPort, const size_t idx)
	Disable a start value to prevent the user from setting it, this is usefully if you calculate the value internally.

void	disableStartValue (const HString &rPortName, const size_t idx)
	Disable a start value to prevent the user from setting it, this is usefully if you calculate the value internally.

void	disableStartValue (const HString &rPortName, const HString &rDataName)
	Disable a start value to prevent the user from setting it, this is usefully if you calculate the value internally.

virtual void	loadStartValues ()
	Loads the default start values to the connected node in each port on the component.

virtual void	loadStartValuesFromSimulation ()

std::vector< Port * >	getPortPtrVector () const

Port *	getPort (const HString &rPortname) const
	Returns a pointer to the port with the given name.

std::vector< HString >	getPortNames ()
	Returns a string vector containing names of all ports in the component.

double *	getSafeNodeDataPtr (Port *pPort, const int dataId)
	Get a pointer to the node data variable, (Port pointer version)

double *	getSafeNodeDataPtr (const HString &rPortName, const int dataId)
	Get a pointer to the node data variable, (Port name version)

double *	getSafeMultiPortNodeDataPtr (Port *pPort, const size_t portIdx, const int dataId)
	Get a pointer to node data in a subport in a multiport.

double *	getSafeMultiPortNodeDataPtr (Port *pPort, const size_t portIdx, const int dataId, const double defaultValue)
	Get a pointer to node data in a subport in a multiport (also setting initial value at the same time)

double	readNodeSafe (const HString &rPortName, const HString &rDataName, const size_t subPortIdx=0)
	Read value based on the port and node data name.

double	readNodeSafe (const HString &rPortName, const size_t dataId, const size_t subPortIdx=0)
	Read value based on the port name and node data id.

void	writeNodeSafe (const HString &rPortName, const HString &rDataName, const double value, const size_t subPortIdx=0)
	Write node data based on port and data name.

void	writeNodeSafe (const HString &rPortName, const size_t dataId, const double value, const size_t subPortIdx=0)
	Write node data based on port and data id.

ComponentSystem *	getSystemParent () const

size_t	getModelHierarchyDepth () const

double	getTimestep () const
	Returns the component simulation time step.

double *	getTimePtr ()
	Returns a pointer to the simulation time variable in the component.

double	getTime () const
	Get the current simulation time.

void	setMeasuredTime (const double time)

double	getMeasuredTime () const
	Returns the measured time variable for the component. This is used to measure time requirements when sorting components for multicore purposes.

void	addDebugMessage (const HString &rMessage, const HString &rTag="") const
	Write an Debug message, i.e. for debugging purposes.

void	addWarningMessage (const HString &rMessage, const HString &rTag="") const
	Write an Warning message.

void	addErrorMessage (const HString &rMessage, const HString &rTag="") const
	Write an Error message.

void	addInfoMessage (const HString &rMessage, const HString &rTag="") const
	Write an Info message.

void	addFatalMessage (const HString &rMessage, const HString &rTag="") const
	Writes a Fatal message and tells the receiver of the message to close program in a controlled way. Also prints message to log file.

void	stopSimulation (const HString &rReason="")
	Terminate/stop a running initialization or simulation.

HopsanEssentials *	getHopsanEssentials ()

HString	findFilePath (const HString &rFileName) const
	Find and return the full file path name of fileName within the system search path, parent systems included (path to HMF file is always in here)

std::vector< HString >	getSearchPaths () const

virtual void	reInitializeValuesFromNodes ()

virtual void	solveSystem ()

virtual double	getStateVariableDerivative (int)

virtual double	getStateVariableSecondDerivative (int)

virtual void	getResiduals (double , double )

virtual void	getJacobian (double , double , double *)

void	addConstant (const HString &rName, const HString &rDescription, const HString &rUnit, double &rData)
	Add (register) a constant parameter to the component.

void	addConstant (const HString &rName, const HString &rDescription, const HString &rUnit, int &rData)
	Add (register) a constant parameter to the component.

void	addConstant (const HString &rName, const HString &rDescription, const HString &rUnit, HString &rData)
	Add (register) a constant parameter to the component.

void	addConstant (const HString &rName, const HString &rDescription, const HString &rUnit, bool &rData)
	Add (register) a constant parameter to the component.

void	addConstant (const HString &rName, const HString &rDescription, const HString &rUnit, const int defaultValue, int &rData)
	Add (register) a constant parameter with a default value to the component.

void	addConstant (const HString &rName, const HString &rDescription, const HString &rUnit, const HString &defaultValue, HString &rData)
	Add (register) a constant parameter with a default value to the component.

void	addConstant (const HString &rName, const HString &rDescription, const HString &rUnit, const bool defaultValue, bool &rData)
	Add (register) a constant parameter with a default value to the component.

void	setConstantValue (const HString &rName, const double value)
	Set the value of a constant parameter.

void	setConstantValue (const HString &rName, const int value)
	Set the value of a constant parameter.

void	setConstantValue (const HString &rName, const HString &rValue)
	Set the value of a constant parameter.

void	setConstantValue (const HString &rName, const char *value)
	Set the value of a constant parameter.

void	setConstantValue (const HString &rName, const bool value)
	Set the value of a constant parameter.

Protected Member Functions inherited from Component
	Component ()
	Component base class Constructor.

virtual void	initialize ()
	The initialize function must be overloaded in each component, it is used to initialize the component just before simulation begins.

virtual void	simulateOneTimestep ()
	Simulates one time step. This component must be overloaded en each component.

virtual void	finalize ()
	Optional function that is called after every simulation, can be used to clean up memory allocation made in initialize.

virtual void	setTimestep (const double timestep)

virtual size_t	calcNumSimSteps (const double startT, const double stopT) const

Port *	addInputVariable (const HString &rName, const HString &rDescription, const HString &rQuantityOrUnit, const double defaultValue, double **ppNodeData=0)
	Add an inputVariable (Scalar signal ReadPort)

Port *	addOutputVariable (const HString &rName, const HString &rDescription, const HString &rQuantityOrUnit, double **ppNodeData=0)
	Add an outputVariable (Scalar signal WritePort) without default value.

Port *	addOutputVariable (const HString &rName, const HString &rDescription, const HString &rQuantityOrUnit, const double defaultValue, double **ppNodeData=0)
	Add an outputVariable (Scalar signal WritePort) with default value.

void	initializeAutoSignalNodeDataPtrs ()
	Automatically retrieve and assign node data pointers that have been registered.

Port *	addPort (const HString &rPortName, const PortTypesEnumT portType, const HString &rNodeType, const HString &rDescription, const Port::RequireConnectionEnumT reqConnection)
	Adds a port to the component, do not call this function directly unless you have to.

Port *	addPowerPort (const HString &rPortName, const HString &rNodeType, const HString &rDescription="", const Port::RequireConnectionEnumT reqConnect=Port::Required)
	Add a PowerPort with description to the component.

Port *	addReadPort (const HString &rPortName, const HString &rNodeType, const HString &rDescription="", const Port::RequireConnectionEnumT reqConnect=Port::Required)
	Add a ReadPort with description to the component.

Port *	addPowerMultiPort (const HString &rPortName, const HString &rNodeType, const HString &rDescription="", const Port::RequireConnectionEnumT reqConnect=Port::Required)
	Add a PowerMultiPort with description to the component.

Port *	addReadMultiPort (const HString &rPortName, const HString &rNodeType, const HString &rDescription="", const Port::RequireConnectionEnumT reqConnect=Port::Required)
	Add a ReadMultiPort with description to the component.

Port *	addWritePort (const HString &rPortName, const HString &rNodeType, const HString &rDescription="", const Port::RequireConnectionEnumT reqConnect=Port::Required)
	Add a WritePort with description to the component.

void	removePort (const HString &rPortName)

bool	getPort (const HString &rPortname, Port *&rpPort)
	Get a port as reference to pointer.

HString	renamePort (const HString &rOldname, const HString &rNewname)
	Rename a port.

void	deletePort (const HString &rName)
	Removes and deletes a port from a component.

virtual HString	determineUniquePortName (const HString &rPortname)
	a virtual function that determines a unique port name, needs to be overloaded in ComponentSystem to do this slightly different

Protected Attributes inherited from Component
ComponentSystem *	mpSystemParent

bool	mInheritTimestep

double	mTimestep

double	mDesiredTimestep

double	mTime = 0

size_t	mModelHierarchyDepth
	This variable contains the depth of the system in the model hierarchy, (used by connect to figure out where to store nodes)

std::vector< HString >	mSearchPaths

Additional Inherited Members